Bioseb has low cost syringe pumps in stock for use in Biomedical Research Laboratories! You can probably buy these from your supplies budget. These pumps have all necessary features. They accommodate syringes from 1 to 50 ml in volume. Single speed pumps give you from 40 minutes to 3 days of continuous infusion with flow rate dependent on syringe size. The multi-speed pumps infuse for times ranging from 20 minutes to 2 weeks! Why wait? Why pay more? Your satisfaction is guaranteed.

Model BSP Single-Speed
The Model BSP Single Speed syringe pump is specifically designed to infuse fluids at an exact and reproducible flow rate from either glass or plastic syringes. Model BSP syringe pumps are equipped with:
• Automatic shut-off switch (disconnects power at end of syringe)
• Indicator On Light
A calibration index is provided for infusion rates with different size syringes.

Model BSP-99M Multi-Speed
The Model BSP-99M syringe pump has 99 speeds and is designed for use with readily available glass and plastic syringes (up to 50 ml).
Model BSP-99M syringe pumps are equipped with:
• Built in flow chart
• 99 equally spaced infusion speeds
• A calibrated sheet providing flow rates for the major brand syringes
• Automatic shut-off
• Sound alarm to signal an empty syringe

Computer controlled model BSP-100: The latest development in syringe pumps, the BSP-100, is controlled by an internal computer so that exact infusion rates can be set. Front panel switches allow for a simple setup, thus avoiding complicated menus or charts. All the settings are shown on the LCD display. All these new features come with the proven reliability of the classic BSP-99M.

Pulser Software for BSP-100
Pulser™ is a Windows® based software program used to control the BSP-100 via a computer USB output. The program calculates the pulses needed to provide the selected flow rate and send these to the pump. The program has a file storage of standard syringes. The information is designated by size, brand name and catalog number, crosssectional area and capacity in ml. If syringe is not listed the data can easily be entered. The Pulser™ software has a file to store programs. The user enters the name of a program, the syringe that is being used and the starting level of the liquid in the syringe. Pulser™ has a screen for adding steps to the program. With this feature, the user can enter infusion, withdrawal and pauses, with initial flow rates, final flow rates, and either volume infused or time of infusion. The steps can be saved, and new ones can be entered. The Pulser™ software has a “Run” screen, and when the program is selected, a graph of flow rate vs. time, time remaining and the flow rate will be displayed. This program is supplied when the computer option with a pump has been ordered.

Micro-Syringe Adapter
The Micro-Syringe Adapter is designed to be used in the BSP syringe pumps when using syringes of 5 ml or smaller. It is possible to insert two micro-syringes in the adapter.

NOTE: Rates specified obtained with a 50 ml syringe
Following table offers an overview of rates corresponding to other synringe sizes: