MATERIAL: MONEL
This Nickel-Copper Alloy is used for its excellent combination of corrosion resistance, strength & ductility. The corrosion resistance in seawater is especially good under high velocity conditions.

COLORS
Plain Monel only - No colors are available. We do have colored plastic washers that can be sealed into the ear tag, but they do tend to get chewed on if animals are housed together.

NUMBERING/STAMPING
• 3 digit consecutive stamped number will fit on one side - 6 digit is available but will extend around other side.
• Paint-filled characters.
• Special stamping available - 1 line of 4 characters.
• Laser-Etched Consecutive numbering & lettering.

NEW STAINLESS STEEL APPLICATOR
Our new Stainless Steel Applicator is designed to seal the tags with minimal pressure, while providing a good, secure seal. Applicator can be used with or without the spring. The spring applies slight closing pressure to help hold the tag in the applicator prior to sealing.

APPLICATOR HINTS:
Place the tag in the applicator keeping the “hole” side of the tag flat against the jaw of the applicator with the indentation. Locate the tag within the ear, applying beyond a ring of cartilage. After sealing, be sure to check that the tag point has come through the hole and bent around sealing properly. Tags should be washed in alcohol or similar cleaning solution to help prevent infection to the ear.

Made on request - please precise numbering when ordering : no restocking on these items.