Site Metrics and Web Analytics by WebSTAT
Home > Catalog > Surgery & Stereotaxy Equipment
Product
Category
OXYSTAR-100 O2 MONITOR
(Model: OxyStar)
Fast-response respiratory oxygen measurement

- More information - - Documents - - Contact Bioseb -
Technical specifications
Other products / accessory  
Download PDF
This page is available in following languages:

Presentation

The OxyStar-100 is a fast-response, high accuracy oxygen analyzer for respiratory monitoring, hypoxic gas studies, or general laboratory use. It features a measurement range of 0 - 100% O2, with a resolution of 0.1%. Sample flow is adjustable over a 10 - 200ml/min range, making respiratory oxygen measurements possible on small as well as larger animals and human subjects.

Operating principle

The instrument uses an advanced paramagnetic oxygen transducer with fully digital operation. Calibration is accomplished with a simple two-point procedure, typically nitrogen (for 0.0%) and room air (20.9%). The analyzer offers excellent linearity and stability over its entire measurement range.
Standard features of the OxyStar-100 include simple one-knob calibration, analog voltage output signal, and a serial data output for remote monitoring or data collection.
A bar-graph display shows rapid changes and trends over three user-selectable ranges.
Sample inlet and outlet connections use standard Luer-loc fittings.
The instrument comes complete with sample tubing and an accessory pack of tubing and adapter fittings for constructing custom sample tubing configurations.

THE INFORMATION IN THIS WEB SITE AND IN LINKED PAGES AND DOCUMENTS IS PROVIDED "AS IS" AND DOES NOT CREATE ANY EXPRESS OR IMPLIED WARRANTY ABOUT BIOSEB OR ITS PRODUCTS OR SERVICES.

Information published on this Web Site as well as services, product specifications, availability and prices are subject to change without notice. BIOSEB may also make improvements and/or changes in the products and/or the programs described in this Web Site at any time without notice.

BIOSEB has made reasonable efforts to verify that the information in this Web site was accurate when first published. Such information may contain errors or omissions, however, and it is subject to change without notice. Bioseb does not undertake to update this information to include any such changes or to correct errors or omissions. Bioseb assumes no responsibility for any use of the information in this Web site or for any infringement of patents or other rights of third parties that may result. Certain information may be country-specific and may not apply in all countries.

Measurement range 0 - 100% O2
Intrinsic accuracy <+0.15% O2
Linearity over full measurement range <+0.1% O2
Measurement resolution 0.1% O2
Repeatability <+0.1% O2
Zero drift <+0.2% O2 / month
Response time (21% O2 - 16% O2) <330mS @ 150ml/min
Transducer technology Paramagnetic
OUTPUT voltage range 0 - 10.0V
OUTPUT connector BNC
SERIAL OUTPUT protocol 2400,N,8,1
SERIAL OUTPUT connector 9-pin D-SUB female
SAMPLE INLET / OUTLET connectors Luer-loc female
Power requirements (using supplied power adapter) 115/230V, 50/60Hz @ 5VA
Dimensions 9.3W x 2.5H x 8.0D inches (23.6 x 6.4 x 20.3 cm)

Model:
OxyStar
OxyStar-100 O2 Monitor
Contact us

Related products:
MicroCapstar
MicroCapStar
Contact us
CAPSTAR-100
CAPSTAR-100 CO2 Analyzer
Contact us
GSM-3
GSM-3 Gas Mixer
Contact us
GEMINI
End-tidal O2 and CO2 monitor
Complete with accessory pack, 110/220V Contact us
Print version

Bioseb - In Vivo Research Instruments
Phone worldwide : +33 442 344 360 - USA/Canada : (727) 521-1808
e-Mail : Worldwide: info@bioseb.com - USA/Canada: info-us@bioseb.com